Your pool filter traps much of the debris that can pollute your swimming water. It’s essential to keep the pool filter clean to improve filtration and keep your pool equipment running efficiently. Filter cleaning improves water circulation and helps clarify water.
Filter Cleaner M2000 removes:
- Most soils.
- May be used as a soak for cartridge filters. Soak for 24 hours and the Cartridge will be like new with no damage to the paper.
The original quick clean back wash filter cleaner. Follow the directions and just pour the M2000 through the skimmer while the filter is on back wash until the water comes out clean.
For Deep Cleaning: Filter Cleaner M2000 is compatible with cartridge, sand, and diatomite filters. To clean filters up to 24” in diameter, mix one quart of Filter Cleaner M2000 with five gallons of water. To clean filters from 30” to 36” in diameter, mix two quarts of the cleaner with five gallons of water.
To thoroughly clean sand, DE and other like types of filter media. Backwash the pool before you begin. To do this: Shut off the pump and move the valve to backwash. Remove the filter top and drain the filter. Pour the premixed solution into the filter and add water to completely cover the media. Replace the filter top and soak for four to twelve hours. If your pool has a high mineral content, scale or oil buildup, soak the filter overnight. After soaking, backwash until the water runs clear. Start the pump and fill the filter with clean water.
To clean cartridge filters, remove the cartridges and rinse them with clean water. Place the cartridges into a solution of one quart of Filter Cleaner M2000 per ten gallons of clean water in a plastic container. Let the cartridges soak in the solution for at least four hours. After cleaning, rinse with clean water and return the cartridge to the filter.