Skill-it

Skill-it Algaecide is EPA registered and works with most common swimming pool chlorine and non-chlorine sanitizers to effectively remove and eliminate algae.

Skill-it eliminates the majority of resistant colors and types of algae. It does not stain and is non-metallic. It’s a user-friendly product that doesn’t require adjustment to the water pH before applying. Customers find Skill-it Algaecide to be an important tool for fighting resistant, persistent algae over the long term. The product can be reapplied if the initial application doesn’t completely eliminate the algae problem. Skill-it Algaecide can be added by itself directly to the pool water or water circulation equipment to eliminate algae.

Skill-it Features

Skill-it Algaecide is a user-friendly, EPA registered algae remover. It removes strong and persistent algae including most types, colors and forms of algae. It can be applied directly to water for treatment.

  • 50% concentration that kills and prevents algae
  • Non-metallic formula that won’t cause staining
  • Removes most types of algae including persistent forms of algae
  • Can be applied directly to the water
  • Quart bottle (32 Ounces)

Skill-it Instructions

Skill-it works best when it is added directly to pool water by itself in the area where the algae is most severe. (turn off water features and keep agitation to a minimum to prevent excessive foam during treatment) The product is compatible with most swimming pool chemicals but should never be mixed directly with chlorine or any other oxidizer. Add 26 ounces of this product to each 50,000 gallons of water (5.2 ounces per 10,000 gallons) or ratio thereof. Vacuum the pool after 24 hours to remove dead algae. If the algae are still visible, repeat the process until the pool is free of algae. For maintenance application, add 1.60 ounces per 12,500 gallons or 6.5 ounces of Skill-it to 50,000 gallons of water every three to five days or as necessary. A booster application may be need is after a heavy rainfall or when many swimmers have been in the pool. Then, add 6.5 ounces of the product to 50,000 gallons of water. If algae growth is noticeable, use the initial application of the product for best results.

After treatment allow the filter to run for at least 6 hours after adding algaecide. During this period, swimmers must not be allowed into the water.

Download the Safety Data Sheet

logo

Bio-Dex Laboratories, Inc.
4212 W. Innovative Drive
Phoenix, AZ 85086
Voice: 800-617-3477
Local: 623-582-2400
Email: Customer Service

Copyright © 2013. All rights reserved
Facebook
Facebook
Pinterest