Aqua Pure

Aqua Pure creates sparkling clear water with a beautiful blue brilliance. This product treats mild to severe algae problems and helps prevent the return.

Aqua Pure Algaecide is a unique copper/quat formula for eliminating algae in all the common colors and forms. This chleated formula helps to prevent copper staining which can be common hen using other copper algaecides.

Aqua Pure Features

Eliminates algae and prevents the return. Used often as a three month algaecide when normal chlorine residual is maintained. Initial application applied in the spring can keep the pool algae free all summer when proper chlorine levels are maintained.

Aqua Pure Instructions

Aqua Pure: Pool water pH should be in the range of 7.2 to 7.6 for treatment. When the main drain is not visible, use one quart of the product for a 10,000 to 15,000 gallon pool. For 20,000 to 30,000 gallon pools, use two quarts. Add the product by slowly pouring it around the perimeter of the pool. Use a pool brush to mix the product into the water. After 30-45 minutes, add six gallons of liquid chlorine or four pounds of dry chlorine. Run the pool filter for 24 to 48 hours. If the main drain is visible, add half of a quart of Aqua Pure by pouring it around the perimeter of the pool. Use a pool brush to stir the product into the water. Wait 30-45 minutes before adding three to four gallons of liquid chlorine or two to three pounds of dry chlorine. Run the pool filter for 24 to 48 hours continuously.

Download the Safety Data Sheet

logo

Bio-Dex Laboratories, Inc.
4212 W. Innovative Drive
Phoenix, AZ 85086
Voice: 800-617-3477
Local: 623-582-2400
Email: Customer Service

Copyright © 2013. All rights reserved